Descargar Imprimir esta página

Pit Boss PBMEMUU001 Instrucciones De Montaje Y Funcionamiento página 40

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRIC SMOKER CARE AND MAINTENANCE
SAFETY WARNING FOR ELECTRIC SMOKER:
Always allow the smoker and all components to completely cool before handling or cleaning.
Before storing smoker or leaving unattended, remaining embers, hot coals, and ashes must be removed. Be careful to protect
yourself and your property. Any remaining embers, hot ashes or hot coals should be placed in a non-combustible metal container
and completely saturated with water. Leave ashes and water in the metal container for 24 hours before you dispose of them.
Place extinguished embers, coals and ashes a safe distance from any combustible materials.
Electric cord and controller should also be stored in a dry location that is out of the reach of children. Do not operate smoker with
an electric controller that has a damaged cord, plug or metal probe. The electric controller is made specifically for this smoker, call
us for a replacement controller.
Never immerse electric controller or heating element in any liquid.
CARE AND MAINTENANCE FOR ELECTRIC SMOKER:
Water pan, wood chip pan and cooking grids should be washed with hot, soapy water then rinsed and allowed to dry. Cooking
grids can be lightly coated with vegetable oil or cooking spray to prevent food from sticking.
After the electric element has completely cooled, clean with a damp cloth after each use.
Door seal and inside seam seal attaches to, MUST be cleaned with a clean damp cloth after each use to keep seal in proper
working condition.
Glass door can be wiped clean, using a vinegar water solution and soft cloth. A fine triple 0 steel wool can use be used. Do not use
oven clean, or household glass cleaners.
If not using the smoker over a long extended period, a light coating of vegetable or cooking spray may also be applied to the
inside of the smoker to prevent rusting.
If rust appears on the exterior of the smoker, clean the affected area with steel wool and apply a high-temperature resistant paint.
Do not apply additional paint to the interior surface of the smoker. If rust develops, use steel wool to remove and then coat with
vegetable oil or cooking spray.
When cool and not in use, store your smoker indoors in a dry location to protect against rust.
40

Publicidad

loading

Este manual también es adecuado para:

10617