BSV BS POOL PRO200 Manual De Usuario página 49

ATTENTION: Please, remember CL probe must be connected to
PRO200-IP65 directly. Its reading is galvanic isolated in the
equipment
3.2.5.4- Installation
Please, follow the instructions form the specific PRO/2 kit manual. This manual
details how to perform the following operations:
- Hydraulic installation
- Probe calibration
- Maintenance
3.2.6- NTC/1 kit (OPTIONAL) for PRO equipment
The temperature probe kit enables you to take a reading of the water
temperature. Once the probe has been connected, the temperature will be
displayed in the main screen.
By installing this kit, you will also be able to use the semi-automatic control
mode. More details on this mode can be found on page 60 of this manual.
3.2.7- Kit CONDUCTIVITY
The Conductivity Kit from BSPOOL performs a continuous measurement of your
Swimming pool's water chloride. It is specially suitable to work with salt water
chlorination Systems, and it will allow to know the salt concentration in the
water, and also the electrolysis cell condition. This sensor has been designed to
work with BSPOOL Systems exclusively. In order to confirm the compatibility
with your BSPOOL chlorinator model, please, ask to your distributor.
Manual PRO200-IP65 v1.0
49 / 66