BSV BS POOL PRO200 Manual De Usuario página 61

4.1.6.2- Adjustment of the set value (Max. mV/PPM)
If free chlorine or ORP probe is installed (OPTIONAL)
In this case, adjust the value in ppm/mV as required. A value between 1ppm
and 1.5ppm or 700-750mV is correct.
NOTE: if working in automatic, you can also adjust the production percentage
from 0% to 100%,
4.1.2.2.3- Super chlorination
Select this option if you require super-chlorination of your swimming pool,
bearing in mind if filtration pump is disconnected, this mode will stop.
4.1.2.2.4- Free chlorine probe calibration
If you have a free chlorine probe, a menu will appear for you to calibrate it.
Once the reading has stabilized and the chlorine measurement has been taken
with DPD1,
adjust the PPM value provided by the DPD1 measurement.
4.1.2.3- pH menu
You can access the pH menu from the main menu by pressing OK
61 / 66
Manual PRO200-IP65 v1.0