STORZ & BICKEL Plenty Modo De Empleo página 50

7. C O M M I S S I O N I N G A N D O P E R AT I O N
7.1. Heating Up
Turn the device on with the or-
ange power switch (it is rec-
ommended to fill and attach
the Filling Chamber and Cooling Coil
before warming up the Hot Air Genera-
tor).
The power switch lights up to show
that the heater is operative. If the auto
off release handle has already been
activated, then the heating process be-
gins automatically.
Otherwise the heating process must
be started by pressing the orange auto
off release handle.
The heating process is in progress
when the orange control lamp is lit.
The desired temperature may be set
with the temperature adjustment
wheel. Warming up the heat exchanger
may take up to 4 minutes, depending
on the temperature set.
Press the auto off release handle to activate
the heating process
50