Descargar Imprimir esta página

Honda WMP20X1E Manual Del Propietário página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33
MAINTENANCE
Proper maintenance is essential for safe, economical, and
trouble-free operation. It will also help reduce air pollution.
WARNING
Improper maintenance, or failure to correct a problem
before operation, can cause a malfunction in which you
can be seriously hurt or killed.
Always follow the inspection and maintenance
recommendations and schedules in this owner's manual.
To help you properly care for your pump, the following pages include
a maintenance schedule, routine inspection procedures, and simple
maintenance procedures using basic hand tools. Other service tasks
that are more difficult, or require special tools, are best handled by
professionals and are normally performed by a Honda technician or
other qualified mechanic.
The maintenance schedule applies to normal operating conditions. If
you operate your pump under severe conditions, such as sustained
high-load or high-temperature operation, or use in unusually wet or
dusty conditions, consult your servicing dealer for recommendations
applicable to your individual needs and use.
Remember that an authorized Honda servicing dealer knows your
pump best and is fully equipped to maintain and repair it.
To ensure the best quality and reliability, use only new, Honda
Genuine parts or their equivalents for repair and replacement.
MAINTENANCE SAFETY
Some of the most important safety precautions follow. However, we
cannot warn you of every conceivable hazard that can arise in
performing maintenance. Only you can decide whether or not you
should perform a given task
WARNING
Failure to properly follow maintenance instructions and
precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this
owner's manual.
Safety Precautions
• Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:
• Carbon monoxide poisoning from engine exhaust.
Operate outdoors away from open windows or doors.
• Burns from hot parts.
Let the engine and exhaust system cool before touching.
• Injury from moving parts.
Do not run the engine unless instructed to do so.
• Read the instructions before you begin, and make sure you have
the tools and skills required.
• To reduce the possibility of fire or explosion, be careful when
working around petrol. Use only a nonflammable solvent, not
petrol, to clean parts. Keep cigarettes, sparks, and flames away
from all fuel-related parts.
8
.
MAINTENANCE SCHEDULE
1
Interval
Before each use
Engine oil: Check level (page 9)
Air filter: Check (page 10)
Pump chamber: Flush (page 13)
After each use
First 20 hours
Engine oil: Change (page 9)
Every 50 hours
Air filter: Clean
Every 100 hours
Engine oil: Change (page 9)
Air filter: Clean
Spark plug: Check-adjust (page 11)
Spark arrester: Clean-check
Sediment cup: Clean (page 11)
Every 300 hours
Engine oil: Change (page 9)
Air cleaner paper filter: Replace
Spark plug: Replace (page 11)
Spark arrester: Clean-check
Sediment cup: Clean (page 11)
Valve clearance: Check-adjust
Idle speed: Check-adjust
Fuel tank and filter: Clean
Every 2 years
Fuel line: Check and replace if necessary
1. For professional commercial use, log hours of operation to
determine proper maintenance intervals.
2. Service more frequently when used in dusty areas.
3. These items should be serviced by an authorized Honda servicing
dealer, unless you have the proper tools and are mechanically
proficient.
4. In Europe and countries where machinery directive 2006/42/EC is
enforced, this cleaning should be done by your servicing dealer.
Failure to follow this maintenance schedule could result in
non-warrantable failures.
ENGLISH
Item
2
(page 10)
2
(page 10)
4
(page 11)
2
(page 10)
4
(page 11)
3
3
3
3

Publicidad

loading