Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CHECKING THE FULLNESS OF DUST CONTAINER
If the suction power of the vacuum cleaner decreases even when the floor nozzle is raised above the floor, empty the
dust container immediately.
Warning: if the suction power is low even after the dust container is emptied, there may be several reasons:
- Some of the air passages (hose, telescopic tube, suction opening, floor nozzle or other attachments) are blocked.
- The air inlet filter in the dust container is dirty or old. It must be cleaned or replaced with a new one.
- The air outlet filter is dirty or old. It must be cleaned or replaced with a new one.
Check each of these options and fix the problem before using the appliance again. If you are unable to identify the cause
of the problem, take the appliance to your nearest service centre. Never use the appliance if the suction power is low, as
this could irreparably damage the motor.
MAINTENANCE
It is recommended to empty the dust container and clean the vacuum cleaner filters after each use of the vacuum
cleaner.
EMPTYING THE DUST CONTAINER
1. Unplug the vacuum cleaner, pull the hose out of the suction opening.
2. Press the latch on the vacuum cleaner body (Fig. 3) and remove the dust container
upwards.
3. Remove the lid from the dust container and empty the dust into the trash can.
4. After closing the container, place it back into the vacuum cleaner. Make sure the
container is positioned properly. You must hear the click of the handle latches.
REPLACING THE FILTERS
• The filters should be cleaned or replaced with visible soiling or when the suction power of the vacuum cleaner
drops. Check them after each use of the vacuum cleaner.
• To avoid damaging the vacuum cleaner, do not use it without properly fitted filters.
• Unplug the vacuum cleaner before replacing the filters.
• You can purchase suitable filter types from your dealer or order from the manufacturer.
CHECKING AND REPLACEMENT OF THE AIR OUTLET FILTER
1. Press to open the air outlet grille at the back of the vacuum cleaner (Fig. 4).
2. Remove the filter.
3. The filter can be cleaned by tapping. If heavily soiled, it can be washed in
lukewarm water and left to dry properly.
4. Insert a clean or new air outlet filter and close the air outlet grille.
CLEANING AND MAINTENANCE
Accessories and vacuum cleaner can be cleaned with a damp cloth.
Do not immerse the power cord, plug or appliance in water or any other liquid. Do
not use aggressive substances such as solvents or abrasives for cleaning!
48
TROUBLESHOOTING
Problem
The motor is not working
The motor stopped working
Reduction of suction power
The vacuum cleaner is warming
SERVICE CENTRE
Fig. 3
Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified specialist or the service centre.
ENVIRONMENTAL CONCERNS
• Packaging materials and old appliances should be recycled.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan:
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The symbol
on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it should be taken to the appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise
Fig. 4
be caused by inappropriate waste handling of this product. The disposal of such material has to be
done according to the recycling regulations. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the shop where
you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific product.
Changes in text, design, and technical specifications are subject to change without prior notice and we reserve the
right to change them.
VP524x
VP524x
Cause
The plug inserted incorrectly or
insufficiently in the wall outlet.
The wall outlet is not energized.
Poor or too low airflow, thermal
motor protection has tripped.
Filled or clogged dust container.
The filters are clogged.
Clogged nozzle, tubes or hose.
Warming up of the vacuum cleaner during operation is normal, it is not
up
a malfunction.
EN
Remedy
Check connection of the plug.
Check the presence of voltage, e.g.
with another appliance.
Unplug the power cord. Check
and clear the intake and exhaust
air passage, filter cleanliness, and
if necessary, replace the dust bag.
Allow the vacuum cleaner to cool
down.
Empty and clean the dust container.
Clean or replace the filters.
Check and clear the intake and
exhaust air passage.
49
Publicidad
