Setting The Boiler Temperature/Steam Keys - Faema CARISMA S-1 Manual De Uso Y Instalación

5. Setting the boiler temperature/steam keys

Version: Carisma A Quicksteam (wands: water - Quicksteam)
In the Quicksteam versions, the programming phase includes setting the
boiler temperature and the temperature for the steam keys:
1
To access the programming
menu, press and hold the
center key OK for at least 4
seconds.
5
01 = Frothed key Use the +/- keys on the side to set
the stop dispensing temperature
(40÷85°C).
The presence of reference marks
below the temperature follows this
logic:
1 MARK
Reference
2 MARKS Setting phase
Mark
Stop
3 MARKS Setting phase
dispensing
temperature
8
Press the center key OK and
proceed to set the hot steam
key.
Use the +/- keys on the side to set
02 = Hot key
the stop dispensing temperature key
(40÷85°C).
Stop
dispensing
temperature
10
2
Instant boiler temperature
SET
*
Set temperature
An asterisk and the word SET
appear on the display.
Setting phase
Stop temperature
Dispensing
Start air temperature
Stop air temperature
C o n f i r m a n d e x i t t h e
p r o g r a m m i n g m e n u b y
pressing the center key OK.
3
OK
SET
*
Use the +/- keys on the side
to set the boiler temperature
(value with large characters).
6
Start air
temperature
Press the center key OK and
use the +/- keys on the side to
set the start air temperature
(compressor working).
9
Start air
temperature
Press the center key OK and then use the +/- keys on the side
to set the start air and stop air temperatures. The hot steam key
must be set at the same temperature.
36
English
4
Press the center key OK to
pass to the phase for setting
the frothed steam key.
Note: Each time the center
programming key OK is
pressed, the next screen
appears.
7
Stop air
temperature
Press the center key OK and
use the +/- keys on the side
to set the stop air temperature
(compressor not working).
Stop air
temperature
English