Viewing Boiler Pressure / Temperature; Checking The Water Level In The Tank; Checking The Water Level In The Tray - Faema CARISMA S-1 Manual De Uso Y Instalación

7.

Viewing boiler pressure / temperature

The boiler temperature or pressure (set and read) can be viewed
on the display:
Press the center key OK to alternate the display of the
temperature / pressure readings.

8. Checking the water level in the tank

The lack of water in the tank is signaled by the appearance of
the related icon and a different color of the display.
Fill the tank with new water to the maximum level.
If this operation is delayed, a safety device will intervene and
make it impossible to prepare coffee.
Carisma S version
NOTE: If you should
run out of water during
coffee dispensing, lower
the dispensing lever
before you remove the
filter holder.

9. Checking the water level in the tray

When the tray is filled with water, the words "EMPTY ME"
appear in the special slot on the grid.
Carefully remove the tray and empty the water.
Note: It is advisable to periodically empty the water that collects
in the tray and not wait for it to completely fill with water.
EMPTY ME
38
English
English