Kodak ABR2300 Manual Del Operador página 11

CONTROL PANEL -KODAK ABR2300
1 Skew Correction Key (Future Option)
2 Centring key
Depress as necessary to enable or disable the image
centring function.
ON: When AUTO or OFF is selected with the
Masking Button, the image on the screen is
centred on the paper for print.
OFF: The screen image will not be centred.
3 Image Masking
Depress when required to mask an unwanted image
so that it will not be reproduced on the print.
AUTO: The machine automatically masks the
areas outside the image (i.e. the frame).
MANUAL: The machine masks the areas other than
those specified with the Manual Masking
Panels.
OFF: No masking is made.
4 Film Format Key
Depress as required to select the format of the print
image according to the film image format projected on
the Screen.
AUTO : Automatically determines the film image
format (portrait or landscape) on the Screen
when making prints.
: Prints the film image in portrait format.
: Prints the film image in landscape format.
5 Screen Brightness Select Key
Depress as required to change the brightness of the
Screen (Projection Lamp light intensity) and turn OFF
the Projection Lamp in reader mode.
High Middle
6 Print Mode Selection Button
AUTO : When AUTO is selected, the machine
automatically sets the mode according to
the polarity of the film being used.
N-P : Select when you use negative film.
P-P : Select when you use positive film.
7 Exposure Adjustment Key (Darker)
Press as required to set the print image density in the
Auto or Manual Exposure Mode.
Press "Darker" to make the image darker.
Low Projection Lamp OFF
9