Kodak ABR2300 Manual Del Operador página 19

SELECTING SCREEN BRIGHTNESS
The Screen Brightness Select Key can be used to vary the brightness of the Screen. Select it according to
the film and environmental conditions.
The default setting is "High", but it can be changed to "Middle" or "Low". Consult your Kodak Technical
Representative.
Auto Lamp OFF Function
If the machine is kept idle for a given period of time, the Projection Lamp is automatically turned OFF.
This not only extends the life of the Projection Lamp, but also saves power.
* The period of time after which the Projection Lamp is turned OFF can be selected from among the
following five:
(1) None (2) 5 min. (3) 10 min. (4) 15 min. (5) 30 min.
Consult your Kodak Technical Representative.
If the Auto Lamp OFF function is cancelled, the Projection Lamp turns on again when any of the keys
on the control panel is depressed.
The Fusing Heater Lamp can be turned OFF by this function.
Each time the key is depressed, screen
brightness changes in the following order.
High
Middle
Low
Projection Lamp OFF
17