Kodak ABR2300 Manual Del Operador página 39

Hold up the upper half of the Fusing Unit and
gently pull the misfed paper out in the direction
shown by the arrow.
CAUTION
The Fusing Unit is very hot: remove the sheet
of misfed paper after it has sufficiently cooled
down.
Swing down the Upper Unit by pressing the Upper
Unit Lock Lever.
Slide the Projection Unit back into the machine.
NOTE
The machine does not operate if the
Projection Unit is left loose. (At this time, the
Multi-Print Display shows "U7".)
Close the Right Cover.
NOTE
The machine does not operate if the Right
Cover is left open. (At this time, the Multi-
Print Display shows "U7".)
37