Concept VP5230 Manual Del Usuario página 57

OPERATING MANUAL
ASSEMBLY OF THE VACUUM CLEANER
NOTE
Before fixing or removing accessories, always pull the plug out of the electrical
socket!
1. Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance's air suction inlet.
Continue pushing until you hear a clicking sound, which indicates that the
correct position has been reached.
For removing the flexible hose, press both stopper buttons and remove the hose
(Fig. 1).
When the slide throttle is closed, the air flow is stronger. Slide throttle in open
position – weaker air flow.
2. Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3. Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4. Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly. The flap
(Fig. 2) is used for setting the floor attachment to brushing (for smooth floors), or
to smooth vacuuming (for carpets).
ACCESSORIES
A Slot nozzle
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots, corners,
pedestals, spaces between upholstery, and others.
B Long slotted nozzle
C Mini turbo brush PET
D Parquet nozzle
E ECO 4A Floor attachment
F Large turbo brush
USING THE APLIANCE
Before using the appliance, make sure that filters and the dust container are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable length.
Do not unwind the supply cable beyond the red mark!
1. Insert the plug into the mains outlet.
2. Press the main switch on the vacuum cleaner.
3. After vacuuming, turn off the product and unplug from the mains outlet.
4. To wind the power cord, press the power cord winding button. Use your other hand to make sure the power cord
does not whip around.
VP5230 VP5230
EN
Fig. 1
Fig. 2
57