Etac R82 Multi Frame Manual Del Usuario página 36

General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and appliances for
children and teenagers with special needs. To fully benefit from the options offered by this product please read this
user manual before use and save it for future reference.
Intended purpose
The device is a frame for seating systems for children
and adults with disabilities.
Indications
The device is used together with a seating system (i.e.
a modular seating system like R82 x:panda or R82
Panda Futura). It can be used by children and adults
with disabilities, who lack the ability to maintain a
seated position and move around (Within the room
or between rooms / outdoors) without an assistive
device. The target group for the device is based on
functional ability and anthropometry. It is not based
on a specific health condition or age.
The user is the person sitting in the seat used with
the frame. The caregiver is the person operating
the frame. Never leave the user unattended in this
product. Ensure permanent supervision by a caregiver.
The use of the device will be discontinued more times
during the day where the user will be lying down,
standing or sitting in another assistive device or a
conventional product.
For transportation the device is suitable for children
and adults in the weight range of 22 kg to specified
max user weight for transportation.
Contra indications
There are no known contra indications
Precautions
There are no known precautions
Application areas
The product is for indoor and outdoor use
Enclosed tools:
• 4, 5 and 6 mm Allen key
• 10 and 13 mm spanner
Declaration of Conformity
This product conforms to the requirements of the
Medical Devices Regulation (2017/745). Further, this
product conforms to the requirements according to:
• EN 12183
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended purpose
and declaration of conformity
• Using other than original R82 spare parts and
fittings
When combining the device with other products, the
combination must not change the intended purpose
of the products or modify the products in such a way
that compliance with the applicable requirements may
be affected. The person / company responsible for
the combination of the products must ensure that the
applicable requirements are fulfilled.
Applicable requirements examples:
• Alignment of user weight/mass of the combined
seat and base, approval for transportation in
vehicles of both products (ISO16840-4 for seat
EN
ENGLISH
and ISO7176-19 for base)
• Material safety (biocompatibility, flammability),
mechanical safety (stability, squeezing hazards,
inter connection), electrical safety
Disposal
When a product reaches the end of its lifetime, it
should be separated by material type so that the
parts can be recycled or disposed of properly. If
required, please contact your local dealer for a precise
description of each material. Please contact your local
authorities to be informed of the options available for
recycling in an environmentally-friendly way.
Accessories and spare parts
The products from R82 can be supplied with a variety
of accessories including vests and belts which comply
with the needs of the individual user. Spare parts can
be ordered on request. Find the specific accessories
on our website or contact your local dealer for further
information.
R82 Warranty
www.etac.com/support
Presales information and instructions
Presales information and instructions are available at
www.etac.com, under your product, in the documents
section.
36
etac.com