Descargar Imprimir esta página

Jocel JCV172I Manual De Instrucciones página 32

Publicidad

Idiomas disponibles

Idiomas disponibles

Make sure there is easy access to the power outlet so that the plug can be removed
when necessary. If this isn't possible, connect the equipment to the mains by
means of a bipolar switch, in an accessible position, with a contact opening of at
least 3 mm.
TEMPERATURE CONTROL
To control the temperature, please use the knob indise of this appliance. You can regulate the
temperature to any of the following positions:
• In the OFF position, the appliance does not work (the
cooling system is switched off), but the power supply is
not interrupted.
Operating time and temperature are affected by the
position of the freezer, the frequency with which the door
is opened, and the temperature of the room in which it is
located.
When using the appliance for the first time or after
defrosting, set the control knob to the coldest position for at least 2 hours before inserting the food
you wish to store, and then set it back to the intermediate position.
Please, note that when the ambient temperature is high we recommend to use a high temperature in
the freezer.
These are the approximate temperatures for each button position:
ELECTRICAL CONNECTION
Connection of the equipment to a power outlet with an earth contact is a legal requirement. For this
reason the equipment is fitted with a plug with an earth wire for connection to an outlet of the same
type.
The manufacturer declines any liability for damage to users, property or pets due to failure if this
point is not considered when use the appliance. Please, check that the voltage indicated on the
technical data plate at the back of the equipment is the same as that of your mains supply.
MIN.
-8 ~ -12ºC
MED.
-15 ~ -18ºC
MAX.
-22 ~ -25ºC
32

Publicidad

loading