Publicidad
Installing the Switch in a Rack
All manuals and user guides at all-guides.com
Perform the following procedure to install the switch in a standard 19-inch
rack. If you are not installing the switch in a rack, go to the next procedure.
1. Place the unit upside down on a level, secure surface.
2. Using a flat-head screwdriver, remove the self-adhesive rubber feet
from the bottom of the switch, as shown in Figure 2.
3. Turn the switch over.
4. Attach the two rackmounting brackets (provided) to the sides of the
switch using the bracketmounting screws (provided), as illustrated in
Figure 3.
Figure 3. Attaching Rackmounting Brackets
AT-GS900/16, AT-GS900/24 Gigabit Ethernet Switches
Figure 2. Removing the Feet
605
27
Publicidad
