Publicidad
Idiomas disponibles
Idiomas disponibles
3.3
Rating plates
The rating plate of the dock leveller is located on the crossbar. The specified nominal load specified must not
be exceeded.
1
Distributing company and
address
2
Model
3
Year of manufacture
The rating plate of the hydraulic unit is located on the tank.
The rating plate of the control unit is located at the side on the control housing. Observe the power supply spe-
cifications.
3.4
Labels on the dock leveller
The stickers on the dock leveller were applied at the factory. The stickers on the surround and, if necessary,
on the wall of the installation point must be attached on site (not included in the scope of delivery).
Fig. 3: Exemplary representation, illustration may deviate from the product
1
slinging points for lifting gear
2
black/yellow marking stripes (on both sides) on the dock leveller platform and on the surround of the
installation point as an indicator of tripping hazards
3
orange markings (on both sides) on the dock leveller platform and additionally on the wall of the
installation point for dock levellers with a nominal length of 2000 mm (visible when the dock leveller
platform is above the permitted inclination range of + 12.5 %)
4
user information for the truck driver
5
instructions for mounting the maintenance support
28 - EN
7 8 9
6
4
Nominal load
5
Motor data
6
Manufacturer and address
5
3 4 5
1
2
3
2
4
These assembly, operation and maintenance instructions must be kept for the entire period of use!
7
Serial no.
8
Order no.
9
Customer's purchase no.
1
3
2
Publicidad
