Dynamic Braking Igbt (Only For Size E) - Cfw700E; Nema1 Protection Degree (Only For Sizes A, B, C And E) - Cfw700; Ip21 Protection Degree (Only For Sizes A, B And C) - Cfw700; Safety Stop - Cfw700 - WEG CFW700 Manual Del Usuario

Option Kits and Accessories
7.1.2 Dynamic Braking IGBT (only for size E) - CFW700E...DB...
Refer to item 3.2.3.2 - Dynamic Braking (standard built-in for sizes A, B, C and D and optional
built-in for size E - CFW700...DB...), for more details about the Dynamic Braking.
7.1.3 Nema1 Protection Degree (only for sizes A, B, C and E) - CFW700...N1...
Inverter with Nema1 enclosure. Refer to
(refer to section 7.2 -

Accessories).

7.1.4 IP21 Protection Degree (only for sizes A, B and C) - CFW700...21...

Inverter with IP21 enclosure. Refer to
(refer to section 7.2 - Accessories).
7.1.5 Safety Stop - CFW700...Y1...
According to EN 954-1 category 3 (pending certification). Refer to the guide or the CD-ROM
supplied with the product for more information.
NOTE!
It is not possible to assemble the top cover on inverters of mechanics A that
have optional safety stop. Thus, it is not possible to raise the protection level
of these inverters to IP21 or Nema1.
7.1.6 24 Vdc External Control Power Supply - CFW700...W1...
The use of this option kit is recommended with communication networks (Profibus, DeviceNet,
etc.), since the control circuit and the network communication interface are kept active (with
power supply and responding to the network communication commands) even in the event of
main power supply interruption. Refer to the guide or the CD-ROM supplied with the product
for more information.
7.2 ACCESSORIES
The accessories are installed to the inverter easily and quickly using the "Plug and Play" concept.
When an accessory is connected to the slots, the control circuit automatically identifies the
model of this accessory and its code is presented in the parameter P0028. The accessory shall
be installed with the inverter power supply off.
The code and model of each available accessory is presented in the
can be ordered individually and they will be provided in their own packaging containing the
components and guides with detailed instructions for installation, operation and programming.
46 | CFW700
figure B.2. These inverters have the KN1X-02 kit
figure A.7. These inverters have the KIP21X-01 kit
table 7.1. The accessories