Reset Function; Manual Settings; Time Zone Setting - TFA 35.1147 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
TFA_No. 35.1147_Anleitung
06.10.2017
9:33 Uhr
COLORIS – Wireless weather station
• During night-time, the atmospheric interference is usually less severe and reception is possible in most cases. A single daily reception is ade-
quate to keep the accuracy deviation under 1 second.
7. Operation
• Important: Please do not press any keys during signal reception of DCF time and transmitter.
• Press and hold the +/RESET MIN/MAX button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 15 seconds.
• With the SET button you can toggle between time and date in normal mode.

7.1 Manual settings

• Press and hold the SET button in normal mode.
• 0 (default) appears on the display and flashes.
• Press +/RESET MIN/MAX button to adjust the time zone.
• Press the SET button again to do the settings in the following sequence: The DCF reception (On - default), the year, the month, the day, the
hours, the minutes and the reset to factory settings (rst). Press the +/RESET MIN/MAX button to adjust it.
• Confirm with the SET button.
• Once the DCF time signal is successfully received and the DCF reception is activated, the manually set time is overwritten.

7.1.1 Time zone setting

• You can make the time zone correction (-12/+12) in setting mode.
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
28
Seite 15
COLORIS – Wireless weather station
7.1.2 DCF reception
• By default, the DCF reception is activated (On) and after successful reception of the DCF signal no manual adjustment is necessary.
• Press the +/RESET MIN/MAX button if you want to deactivate the DCF reception (OFF).

7.1.3 RESET function

• In the setting mode, you can reset the weather station to the factory setting (rst).
• Press and hold the +/RESET MIN/MAX button until "rst" stops flashing.
8. Alarm function
• Press the ALM button in normal mode, to enter the alarm mode.
• ALM and 00:00 (default) or the last adjusted alarm time appear on the display.
• Press and hold the ALM button. The alarm symbol will appear and the hour digit will be flashing. Press +/RESET MIN/MAX button to adjust
the hours.
• Confirm the setting with the ALM button and set minutes in the same way.
• Press the ALM button again.
• The current time and the alarm symbol appear on the display.
• When the adjusted alarm time is reached, the alarm rings.
• The alarm symbol flashes.
• Press any button to stop the alarm.
• If the alarm is not stopped manually, the alarm tone automatically turns off after two minutes and will be reactivated at the same set time in
the following day.
29

Publicidad

Tabla de contenido
loading

Tabla de contenido