Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
ELECTROMAGNETIC COMPATIBILITY (EMC) TABLES (CONTINUED)
TABLE 4: RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE RF COMMUNICATIONS EQUIPMENT
AND THE FLUIDOTHERAPY - DRY HEAT THERAPY UNIT (CONTINUED)
The Fluidotherapy - Dry Heat Therapy Unit is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Fluidotherapy - Dry Heat Therapy Unit can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the Fluidotherapy - Dry
Heat Therapy Unit as recommended below.
Rated Maximum Output Power of
Transmitter
0.01
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable
to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and people.
W
0.1
1
10
100
Separation Distance According to Frequency of Transmitter
150 kHz to 80 MHz
d = [3.5]√P
V 1
0.12
0.38
1.2
3.8
12
14
Fluidotherapy® - Dry Heat Therapy
m
80 MHz to 800 MHz
800 MHz to 2.5 GHz
d = [3.5]√P
E 1
0.12
0.38
1.2
3.8
12
d = [7]√P
E 1
0.23
0.73
2.3
7.3
23
Publicidad
