Canon imageRUNNER ADVANCE 500i Guía De Inicio página 34
Ocultar thumbs
Ver también para imageRUNNER ADVANCE 500i:
- Guía rápida de funcionamiento (33 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Setup Guide to Configure the Machine
When the power is turned ON for the first time after installing the machine, the Setup Guide screen is
displayed.
It is recommended that you follow the instructions that appear on the touch panel display to configure
the machine.
NOTE
•
You can restart the Setup Guide from [Start Setup Guide] (
[License/Other]).
•
You can change settings registered in the Setup Guide from the items in
information, see "Changing Specified Settings" on p. 33.
•
For most settings in the Setup Guide, you can move to the next setting even without entering anything. Unset
items can be set separately. You can set them after finishing the Setup Guide.
•
You cannot exit the Setup Guide until it is finished.
•
If the power is turned OFF while using the Setup Guide, when you turn the power back ON, the Setup Guide is
automatically started. Perform Setup Guide settings once again.
•
Once the Setup Guide has been completed, it will not start up again when turning ON the machine.
01
Configuring the Touch Panel Display's
Language and Keyboard Layout
1. Set the language and keyboard layout →
press [OK].
26
Using the Setup Guide to Configure the Machine
(Settings/Registration) > [Management Settings] >
(Settings/Registration). For more
02
Mixing the Toner
Mixing the toner will take a maximum of seven
minutes to complete. Until toner mixing is
completed, you cannot move on to the next
step.
1. Press [Start].
After the toner finishes mixing, press [OK].
▼
Publicidad
