Descargar Imprimir esta página

Canon imageRUNNER ADVANCE 500i Guía De Inicio página 38

Ocultar thumbs Ver también para imageRUNNER ADVANCE 500i:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3. Specify <DNS Dynamic Update> for <IPv4>
→ press [OK].
By setting <DNS Dynamic Update> to 'On' ,
DNS Dynamic Update is enabled.
08
Setting the Proxy Server
If accessing the internet or other external
network through a proxy server from this
machine, these settings are required.
[Server Address]:
Enter the IP address of the proxy server or
the path of the server (i.e., starfish.company.
com).
[Port Number]:
Enter the port number of the proxy server.
<Use Proxy within the Same Domain>:
If using the proxy within the same domain,
press [On].
[Set Authentication]:
If authentication is required when accessing
an external network through a proxy server,
enter the user name and password
registered on the server.
30
Using the Setup Guide to Configure the Machine
[User Name]:
Enter the user name for the proxy
authentication.
[Password]:
Enter the password for the proxy
authentication.
If a fax board is installed on the machine,
proceed to " 9. Setting Country/Region."
If a fax board is not installed on the machine,
proceed to "13. Specifying the System Manager
Settings."
09
Setting Country/Region
1. Select the country/region where the machine
is located → press [Next].
IMPORTANT
This setting is necessary to specify the fax line
settings. This setting can only be carried out in the
Setup Guide.

Publicidad

loading

Este manual también es adecuado para:

Imagerunner advance 400i