Canon imageRUNNER ADVANCE 500i Guía De Inicio página 61

17
Place your hand where the hand
symbol ( ) is located on the right
cover of the main unit, and then gently
close the right cover until it clicks into
place.
When closing the cover, be careful not to get your
fingers caught, as this may result in personal injury .
18
Close the front cover.
1. Close the front cover of the main unit.
2. Lower the control panel back in place.
A notification will inform you when the drum
has been replaced.
When closing the covers, be careful not to get your
fingers caught, as this may result in personal injury .
19
Press [Close].
20
Press [Yes].
Press [Yes] to start initializing the drum unit.
NOTE
• If you want to initialize the drum unit at a later time,
or if you have not yet replaced the drum, press [No].
• For instructions on initializing the drum unit, see
e-Manual > Settings/Registration.
Replacing the Drum Unit
53