Canon imageRUNNER ADVANCE 500i Guía De Inicio página 52

02
Adjust the position of the Side Guide.
*2
*1: Lever
*2: Side Guide
1. Squeeze the lever
2. Without releasing the lever, slide the
guide leftward or rightward to align it with
the mark for the desired paper size.
03
Adjust the position of the Front Guide.
*1: Lever
*2: Front Guide
lever
1. Squeeze the
2. Without releasing the lever, slide the
guide backward or forward to align it with
the mark for the desired paper size.
IMPORTANT
Adjust the guides correctly. Failure to do so may
cause paper jams or dirty prints, or make the inside
of the machine dirty.
44
Loading Paper
*1
on the side guide.
side
*1
*2
front guide.
on the
front
04
Load the appropriate size paper into
the paper drawer.
1. Make sure that the paper size setting of the
paper drawer matches the size of the paper
to load in the paper drawer.
2. Load the paper stack against the right wall
of the paper drawer.
3. Gently push the paper drawer back into the
machine until it clicks into place in the
closed position.
When returning the paper drawer to its original
position, be careful not to get your fingers caught,
as this may result in personal injury .
05
Place the appropriate paper size label
on the paper drawer.
IMPORTANT
The paper sizes marked on the labels may include
sizes that the machine is unable to use.
06
Specify the paper type as required.
For more information on registering the paper
size and type, see e-Manual > Settings/
Registration.
IMPORTANT
Make sure that the paper type setting of the paper
drawer matches the type of the paper that is being
loaded.
1,2
3