Canon imageRUNNER ADVANCE 500i Guía De Inicio página 46

Control Panel Parts and Functions
[Main Menu]
Press to display the Main Menu screen. If the Main
Menu screen is not displayed when using a
function, it is necessary to press [Main Menu]
before using the function.
Touch Panel Display
The settings screen for each function is shown on this
display. Six function keys are displayed by default.
Settings/Registration key
Press to specify settings/registration.
Energy Saver key
Press to set or cancel the Sleep mode. Lights when
the machine enters the Sleep mode.
Numeric keys
Press to enter numerical values.
Clear key
Press to clear entered values or characters.
ID (Log In/Out) key
Press to log in/out when a login service such as
Department ID Management or SSO-H has been set.
Stop key
Press to stop a job in progress, such as a scan, copy,
or fax (scanning only) job.
Start key
Press to start an operation.
Main Power Indicator
Lights when the main power is turned ON.
Error Indicator
Flashes or lights if there is an error in the machine.
When the Error indicator flashes, follow the
instructions that appear on the touch panel
display. When the Error indicator maintains a
steady red light, contact your local authorized
Canon dealer.
38
Parts and Their Functions
Processing/Data Indicator
Flashes or blinks green when the machine is
performing operations, and maintains a steady
green light when fax data is stored in memory.
Reset key
Press to restore the standard settings of the
machine.
Edit Pen
Use when operating the touch panel display, such
as to enter characters.
[Status Monitor/Cancel]
Press to check the status of jobs or to cancel print
jobs. Also, you can check the status of the machine
such as the amount of paper remaining in the
paper source.
[Quick Menu]
Press to display functions registered in the Quick
Menu.
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel
display.
Volume Settings key
Press to display the screen for adjusting settings,
such as the transmission volume and fax sending/
receiving alarm volume.
Counter Check key
Press to display the copy and print count totals on
the touch panel display.