Publicidad
Idiomas disponibles
Idiomas disponibles
13.4. Volume zones adjustment
It is possible to change the volume of the zones using the display of the audio matrix:
Using the / navigation keys, select the zones menu (
1.
Using the / keys select select one zone and press OK.
2.
3.
Select CHANGE VOLUMES and press OK.
4.
Depending on the type of zone (UMX-2SA card zones, UMX-2SB sub-zone or UMX-MC6 sub-zone),
slightly different menus appear:
a. UMX-2SA
1. Select MUS if you want to change the volume of the music program for that zone.
Select PRI if you want to change the volume of the the paging for that zone.
Select EMG if you want to change the volume of the emergency messages for that zone.
2. Press OK.
3. Using the / keys to set the desired volume between +4 and -80dB.
b.UMX-MC6 (Attention: The audio received by the UMX-MC6 card
comes from a UMX-2SA card. Changing the volume of a UMX-MC6
sub-zone is modifying the output volume of the UMX-2SA card, so
it will affect all sub-zones of the UMX-MC6 that depend on that
audio output.)
1. Select MUS if you want to change the volume of the music
program.
Select PRI if you want to change the volume of the paging.
Select EMG if you want to change the volume of the emergency emergency announcements.
2. Press OK.
3. The display shows the list of zones whose volume is affected by the change. You can check the list by using / keys.
Press OK to continue.
4. Using the / keys to set the desired volume between +4 and -80dB.
c. UMX-S2B (Attention: Each sub-zone of a UMX-2SB card has its
own internal volume control for the music program, allowing to
set different musical program volumes for each sub-zone. The
other volumes affect all sub-zones of the UMX-2SB.)
1. Select [MUS] ATTENUATOR if you want to change the
volume of a sub-zone's music program.
2. Press OK.
3. Using the / keys to set the desired volume between 0 and 5.
1'. Select MUS if you want to change the volume of the music program. This change will affect all sub-zones of the UMX-
2SB card.
Select PRI if you want to change the volume of the paging. This change will affect all sub-zones of the UMX-2SB card
Select EMG if you want to change the volume of the emergency announcements. This change will affect all sub-zones
of the UMX-2SB card.
2'. Press OK.
3'. The display shows the list of zones whose volume is affected by the change. You can check the list by using / keys.
Press OK to continue.
4'. Using the / keys to set the desired volume between +4 and -80dB.
5.
Press OK to save.
COMPACT version 5.0.002
COMPACT
(To modify the volumes of music program or paging is required user level Operator or Adminis-
trator. Modifying emergency volume requires administrator user level.)
).
R +D Department
Modular audio matrix
with IP connection
23
Publicidad
