Medtronic GUARDIAN LINK 3 Manual Del Usuario página 18

To charge the transmitter:
1. Push the transmitter and the charger together to connect the transmitter to the charger.
2. Within 10 seconds after the transmitter is connected, a green light on the charger will flash for
one to two seconds as the charger powers on. For the rest of the charging time, the green light
on the charger will continue to flash in a pattern of four flashes with a pause between the four
flashes.
3. When charging is complete, the green light on the charger will stay on, without flashing, for 15
to 20 seconds and then turn off.
4. After the green charger light turns off, disconnect the transmitter from the charger. The green
light on the transmitter starts to flash.
Pairing your transmitter
Always refer to the system user guide for instructions on how to pair your transmitter with your pump.
The pump and the transmitter must be paired before data from the sensor can be sent to the pump.
The pump and the transmitter are only required to be paired once. There is no need to pair the pump
with the transmitter again when you insert a new sensor.
18