OHAUS Courier 5000 Manual De Instrucciones página 9

Courier 5000
2. INSTALLATION
2.1 Packing List
Item Description
1 Base
2 Terminal
3 Coiled cable
4 Brackets
5 Screws
6 AC adapter
7 USB cable
2.2 Unpacking the Scale
Steps
1. Take out the documents, USB cable, terminal, AC
adapter, load cell cable and brackets, then put them to
the side.
2. Remove the foam blocks.
3. Take the Courier 5000 scale base out of the box and put
it on a stable surface.
4. Connect the terminal to the scale base with the load cell
cable.
2.3 Setup
2.3.1 Power Supply Connection
The Type-C cable and the AC adapter can supply power to the scale.
USB Power
1. Use the Type-A end of the USB cable to connect to the
PC.
2. Use the other side of the USB cable to connect to the
terminal's USB port.
Picture
EN-5
Quantity
1
1
1
2
8
1
1
Foam
Blocks
Type A