Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3 YEARS
L I M I T E D WA R R A N T Y
Sharpening the Chiselling Tools
With sharpened insertion tools, one achieves good working performance and long service life.
Therefore, sharpen the chisel regularly.
Sharpen the tool on a grinding wheel (e.g. alumina oxide) with constant water supply.
Maintenance and Cleaning
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and the ventilation slots clean.
Clean the tool mount daily.
Replacing the Dust Protection Cap
Damaged dust protection caps should be replaced as possible since dust that enters the tool
holder can cause malfunctions.
Pull back and hold the locking sleeve 5.pull o the dust cap 4 with a suitable tool.
With the locking sleeve pulled back, pull on the new dust cap until it sits rmly over the tool
holder and the locking sleeve can again be slid forward.
If the machine should happen to fail despite the care taken in manufacture and testing, repair
should be carried out by an authorised customer services agent for Siefken power tools.
For all correspondence and spare parts orders, always include the 10-digit order number of the
machine.
Environmental Protection
Recycle raw materials instead of disposing as waste.
Machine, accesssories and packaging should be sorted for environment-friendly recycling.
These instructions are printed without chlorine. The plastic components are labelled for cate-
gorized recycling.
9
Publicidad
