• Do not use any ac-
cessories that are
not recommended
by PARKSIDE. This
can result in electric
shock or fire.
Charging the battery
Do not expose the
battery to extreme
conditions such as
heat or impact. Risk of in-
jury from escaping elect-
rolytic solution! After eye/
skin contact, rinse the af-
fected areas with water
or a neutraliser and con-
sult a doctor.
Charge the battery
in a dry room only.
Prior to attaching
the charger, check that the
battery's outer surface is
clean and dry.
There is a risk of injury
due to electric shock.
Switch off the device and
remove the battery before
carrying out any mainte-
nance work.
The rechargeable battery
only reaches its full
capacity once it has been
charged several times.
• Charge the battery before
using it for the first time.
• Only use chargers from the
Parkside X 12 V Team series
to recharge the battery.
• If the operating time is con-
siderably shortened despite
charging, this shows that
the rechargeable battery is
depleted and must be repla-
ced. Only use an original
replacement battery from the
Parkside X 12 V Team series,
which can be purchased
from the online shop (see the
"Spare parts" section).
• Always comply with the
latest safety information, as
well as the regulations and
information relating to envi-
ronmental protection.
• Defects resulting from im-
proper handling are not
covered by the guarantee.
Inserting/removing the
battery
1. To remove the battery (1)
from the device, press both
release buttons (2) on the
GB
MT
63