Parkside PAPK 12 A3 Traduccion Del Manual De Instrucciones Originale página 65

such alleged charged.
ging.
Red LED flashes: Error
Used batteries
• If a fully recharged battery
lasts for considerably shorter
operating times, the battery
is used up and needs to
be replaced. Only use an
original replacement battery
from the Parkside X 12 V
Team series, which can be
purchased from the online
shop (see the "Spare parts"
section).
• Always take heed of the
applicable safety instructions
as well as the environmental
protection regulations and in-
formation (see "Cleaning and
Maintenance").
Storage
• Remove the battery before
storing the unit for longer
periods of time.
Green LED (5)
lights up: Battery
Red LED (4) lights
up: Battery char-
• During a longer storage peri-
od, check the state of charge
of the battery and recharge
if necessary roughly every 3
months.
• The storage temperature for
the battery is between 0 °C
and 45 °C. Avoid extreme
cold or heat during storage
to ensure the battery output
is not adversely affected.
• Only store the batteries in
the partially-charged state.
During prolonged storage, 2
to 3 LEDs should be illumina-
ted. The battery charge sta-
tus indicator of the cordless
tool signalises the state of
charge of the battery (1).
Wall mounted charger
(optional)
You can also mount the charger
(3) on the wall.
• Using dowels, place two
screws 54 mm apart at the
desired position of a wall.
• The screw head can have a
diameter of 7 - 9 mm
• Leave the screw heads protru-
ding at a distance of approx.
10 mm from the wall.
• With the openings of the
wall bracket, you can attach
GB MT
65