Master MT Dry 500 Manual De Uso Y Mantenimiento página 25

manufacturer's technical staff or official representatives.
MASTER PRODUCTS is characterized by the continuous improvement of all its equipment. This user manual will con-
tinue to be valid to understand the operation and perform safe maintenance on the purchased equipment, even if
the model is updated with new versions. If the operating characteristics of the purchased product differ from the one
mentioned in this manual, it is necessary to contact MASTER PRODUCTS technical support or any of its authorized
distributors to receive assistance and resolve any questions.
This manual, as well as any documentation supplied by the manufacturer, should be considered as the information
package associated with this equipment. Any user must read and understand this manual before using the equipment.
7. Transport
8. Electrical connection
9. Placement
The MT Dry 500 must be placed on a flat surface without irregularities, ensuring its stability and a good working posi-
tion for the user. It can be used both indoors and outdoors, but never in dangerous environments or in damp or wet
places. The control panel should never be exposed directly to water. It is very important to keep the work area well-lit
and free of obstacles because disorder leads to accidents.
10. Setting-Up
10.1. Assembling the MT Dry 500
The MT Dry 500 is delivered completely protected and boxed. First of all, it is necessary to open the box and check
that all the material received is the one specified in this manual and is in optimal conditions. It is recommended to
place the machine and all supplied components on a flat surface for assembly.
Box 80 x 120 x 100 cm = 106 kg // Net weight MT Dry 500 = 53 kg
The electrical connection must be carried out using a
230 V and 50/60 Hz single-phase power supply.
www.masterproducts.es
25