Publicidad
Idiomas disponibles
Idiomas disponibles
2. Loosen the two nuts identified in red in the following image and move the support until the desired position is
reached. Finally, fix the two nuts to immobilize the wheel.
13. Disassembly and dismantling
- To carry out disassembly or dismantling tasks, it is essential that the equipment be disconnected from any possible
power source or electrical supply.
- For disassembly and dismantling tasks, it is essential to wear protective gloves.
- The covers, the flexible conduits and the components of plastic material or of any non-metallic material must be
disassembled and disposed of separately.
- Hydraulic and electrical components must be disassembled for reuse, if in good condition, or, if possible, checked
and recycled.
- Take the components to an authorized recycling centre for recycling or disposal in an environmentally safe manner.
- Recycle unwanted materials instead of disposing of them as waste.
14. Waste disposal
Waste disposal must be done in accordance with the corresponding national regulations.
15. Residual risks
REASON
Do not use
protective gloves
Remove safety
devices or protections
Placing the machine
on an uneven surface
Moving the machine
while it is running
DANGER
Cuts
Moving parts can catch
clothing or limbs.
Falling risk
Falling risk
www.masterproducts.es
REMAINING RISK
Possible cuts
Potential danger of serious
injury or amputation of
limbs
Trauma or equipment
damage
Trauma or equipment
damage
MEASURES
Wear protective gloves
It is forbidden to
disassemble the protective
elements
Ensure the stability of the
machine
It is forbidden to move the
machine while it is running
37
Publicidad
