Master MT Dry 500 Manual De Uso Y Mantenimiento página 35

5. Remove the ends of the blade from the hooks of the two supports located inside the main body of the machine,
as shown in the following images.
6. Remove the engine block from the machine. First, loosen the clamping knob, and then move it along the groove,
as shown in the following image.
7. With one hand on the upper handle of the engine support and the other on the lower part of the engine itself,
move the block upwards until the lower flange of the support passes the frame window. Then remove the group
as shown in the following image.
35
www.masterproducts.es