Husqvarna 562XP Mark II Manual Del Usuario página 36

Approved cutting equipment for Husqvarna 562 XP Mark II, 562 XPG Mark II:
Guide bar
Length, in/cm Pitch, in
20/50 3/8
24/60
28/70
Filing equipment and filing angles
Use a Husqvarna file gauge to sharpen the saw chain.
A Husqvarna file gauge makes sure that you get the
correct filing angles. The part numbers are given in the
table below.
C85S 4.8 mm / 3.16 in
C83S 4.8 mm / 3/16 in
C85, C83 5.5 mm / 7/32 in
To sharpen the square ground chain professional knowledge and special tools are necessary.
H83, C83SK
36
Gauge, in/mm
0.060/1.6
587 80 91-02
587 80 91-02
586 93 86-02
We recommend to let you Husqvarna servicing dealer sharpen the square ground chain.
Saw chain
Max. nose ra- Type
dius
11T Husqvarna
H83
11T or 34 mm
11T
If you are not sure how to identify the type of saw chain
on your product, refer to www.husqvarna.com for more
information.
0.65 mm / 0.025
in
0.025 mm / 0.65
in
0.025 in / 0.65
mm
Length, drive Low kickback
links (no.)
72
84
92
30° 60°
30° 60°
30° 60°
2053 - 001 - 18.04.2023