Stahlwille SmartCheck USB/DAPTIQ Instrucciones De Uso página 87

General measurement of torques
To measure a torque in general, proceed as follows:
➢ Switch the DPG on, see Page 74.
➢ Set TRACK mode, see Page 74.
➢ Connect the torque wrench to be tested to the DPG, see Page 83.
➢ Actuate the connected torque wrench slowly and evenly in the
desired direction of rotation and monitor the value shown on the
DPG's display.
➢ To save the test value, press the Clear button or start a new
tightening process for automatic saving.
Testing torque wrenches
85