Installing the Hardware
When the GPS receiver is correctly connected, you can press the
button to open the GPS status screen. The detailed GPS data will scroll
across the bottom of the screen:
Screen 1
03/29 09:23P
Date
Confi guring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to
your local time based on the GPS location. You can adjust your local time
forward or back one hour if necessary (for example, if you are close to the
border of a time zone); you can also adjust for Daylight Savings Time.
Follow the steps below to adjust the time:
1.
Display the menu and choose the Setup sub-menu.
2.
Select Local Time Adjust.
3.
The display shows your current local time. To adjust the time forward
one hour, use the
use the
fi nished.
4.
If your local area observes Daylight Savings Time, highlight Daylight
Save and press the
5.
Use the
Savings Time on or off. If Daylight Savings Time is currently in effect,
select On. If Daylight Savings Time is not currently in effect, select Off.
70'00,000N 12
Time
Latitude
Setup
Local Time Adjust
CHANNEL UP
button. Press the
CHANNEL DOWN
SELECT
and
CHANNEL UP
Screen 2
10:25a
button. To adjust the time back one hour,
SELECT
button.
buttons to turn Daylight
CHANNEL DOWN
E-44
SELECT
Screen 3
0'00,000w
Longitude
la
button when you are