Cherubini ORIENS CRC Instrucciones página 43

SMART MODE - motors with mechanical limit switches
SETTING THE FIRST REMOTE CONTROL AND SETTING THE
This operation can only be performed when the control unit is new, or after a total delete
of the memory.
During this step, power up only one control unit at time!
T1: First remote control to be set
+
A B
T1
After the last confirmation movement the motor starts to move in one direction (UP or
DOWN). To properly associate the UP and DOWN buttons, press the button corresponding
to the motor movement for one second as indicated below:
?
AUTOMATIC DISABLING OF THE FIRST
REMOTE CONTROL SETTING FUNCTION
Every time you connect the power supply to the control unit, you have 3 hours to
store the first remote control. After this time, the ability to store the remote control is
disabled. To reset the timer of the function you have to disconnect and reconnect the
power supply to the control unit.
ROTATION DIRECTION OF THE MOTOR
B
T1
A
T1 (1 sec)
C
T1 (1 sec)
43
B
T1 (2 sec)
The motor stops: the
UP and DOWN buttons
are now properly
associated.