Publicidad
Idiomas disponibles
Idiomas disponibles
SMART MODE - motors with mechanical limit switches
SETTING THE SLAT OPENING POSITION
for 2- or 3-position tilt mechanisms (excluding CH Black)
For 2- or 3-position tilt mechanisms (excluding CH Black), the control unit has a
pre-memorized open-slat position, of about 0,8 s, which enables the automatic opening
of the slats at an angle of between 30 and 45 degrees.
If one likes, it is possible to: • Change the slat opening position.
CHANGING THE SLAT OPENING POSITION
Initiate the indicated command sequence and wait for the blind to be completely
lowered.
+
B
C
The motor is now running in dead man mode, enabling
the fine adjustment of the slat opening position. Confirm
the position with B (2 s). The motor automatically opens
the slats.
DISABLING SLAT OPENING
+
B
C
• Disable slat opening, so that the motor does not respond
to the brief STOP command.
+
B
C
+
B
C
46
B
2 sec
B
2 sec
+
A
B
2 sec
Publicidad
