Cherubini ORIENS CRC Instrucciones página 49

SMART MODE - motors with mechanical limit switches
It is possible to run the motor through a switch connected to the control unit with three
wires (up, down and common).
The switch must be equipped with mechanical or electrical interlock, to prevent
two commands being sent simultaneously. Furthermore, the switch must be an
unstable pushbutton: releasing it, the switch opens.
L
N
PE
E P 1
FUNCTIONING
DOWN
DOWN
2-BUTTON SWITCH
2 3
DOWN
UP
1 - NEUTRAL
2 - PHASE
3 - WIRED SWITCH
PE - EARTH
Pressing one of the two buttons and releasing
it, the motor runs in the desired direction
according to the control mode set.
To stop the motor before
reaching the limits press one of
STOP
the two bottons (UP or DOWN).
49