Cherubini ORIENS CRC Instrucciones página 59

It is possible to associate a wind or sun/wind sensor with the control unit. In correspondence
to climatic events, the appearance or disappearance of the sun or with a wind alarm, the
control unit performs the following operations:
Event
Appearance of the
sun (sunlight over
threshold level)
Disappearance of the
sun (sunlight under
threshold level)
Wind alarm (wind
over the threshold
speed)
WINDTEC* - Ref. A520007
*For a description of the functions, check the
WindTec Lux/ WindTec instruction book.
To associate the sensor to the control unit, a remote control must be already memorized.
The setting sequence is the following:
Tn: Already programmed remote control
+
A B
Tn
OPERATION WITH SUN/WIND SENSOR
Automatic movement
Once the sun has come out for 3 minutes, the blind lowers
completely with the slats open.
Once the sun has disappeared for 10 minutes the blind opens:
up to the privacy position if set, or it opens completely.
After 2 seconds, the blind ascends completely; it is not possible
to stop it or bring it down until 8 minutes after the wind speed
has dropped below the threshold.
COMPATIBLE ANEMOMETERS*
WINDTEC LUX* - Ref. A520008
SETTING THE WIND SENSOR
B
Tn
59
set
Set button
Wind-speed
tuning
set
2 sec
Sun-sensor
tuning