Publicidad
Idiomas disponibles
Idiomas disponibles
Operation and maintenance documentation HEATER CONDENS EC v202301
Press MODE
Change on manual mode
Hold MODE for 5 seconds
Change to cool mode
, heating mode
Press FAN
Change of the fan speed low
Hold FAN for 5 seconds
Manual calendar programming Monday – Friday, Saturday, Sunday 6 settings per day
BMS Functions
Setting/Reading work parameters
Work/Stop conditions
Weekly program
Temperature
Fan speed
Heating, ventilation, cool mode
Antifreeze mode
No.
Setting
1
Working Mode
2
Interface
3
Baud Rate
4
Byte
5
Modbus
6
Transmittion
7
Thermostat address
WIFI FUNCTIONS
Setting/Reading work parameters
Work/Stop conditions
Weekly program
Temperature
Fan speed
Heating, ventilation, cool mode
CONNECTION OF THE PANEL INTELLIGENT WIFI WITH THE TUYA APP
1.
Download the Tuya Smart app (available at App Store and Google Play)
2.
The PANEL INTELLIGENT WIFI connects to the power supply and device, PANEL INTELLIGENT WIFI should stay off.
3.
Turn on the Tuya app and follow the instruction in the app
4.
Enable the GPS and Bluetooth in the phone for the connection process
5.
To active paring mode in the PANEL INTELLIGENT WIFI panel double tap and hold the "+" symbol for 5 seconds until
the SA symbol shows on the left side of the screen
6.
Choose the „Add device" function, and the app should find the PANEL INTELLIGENT WIFI automatically, press the
"Add" button, and after completing the configuration process, press "Next" and "Finished"
7.
In the absence of the "Add" function, select the "Small devices" tab and the "Thermostat (Wi-Fi)" function. Then en-
ter the data to connect to the selected WiFi network and confirm, and then "Blink slowly".
8.
A screen will be displayed with information about searching for a device. After detecting the driver, the connection
process is automatic. after completing the configuration process, press "Next" and "Finished"
or automatic mode
, ventilation
, medium
, high
, automatic
RS485 Semi-duplex; PC or main controller is master; thermostat is slave
RTU (Remote Terminal Unit) format (please refer to MOBUS instruction)
1－247；(0 is broadcast address and stand for all thermostat without response)
Paremeters
A(+),B(-), 2 wires
0-2400 / 1-9600 / 2-19200
9 bits in total: 8 data bit + 1 stop bit
RTU Mode
Publicidad
