Coway AIRMEGA 400s Manual Del Usuario página 11

BEFORE USE
Please check before use!
 T he product is for 220 V – 240 V~ 50 Hz, 60 Hz only.
Make sure to connect the power plug to a grounded electric outlet
(220 V – 240 V~ 50 Hz, 60 Hz) dedicated to the product.
How to install filter
Tips
1.  O pen the side cover.
Pull the upper part of the side cover to open.
2.  T ake out the filter and 
remove the plastic packaging.
Remove the plastic packaging from
filters, excluding the pre-filter, and
assemble them in the purifier in
order.
＊ Filter assembly order :
Max2 filters → Pre-filters → Covers
3.  R eattach the side cover.
Fit the two tabs on the bottom part of the side cover into
their slots and push to install.
＊ If the side cover is not properly attached, the product will not
operate.
- Be sure to install the filter after removing the plastic packaging.
- Only use it indoors.
- When not in use, remove the power plug from the socket.
- During filter assembly, check the front of the filters.
▶ Filter assembly order : Max2 filters → Pre-filters → Covers
How to use
ENGLISH / 10