Descargar Imprimir esta página

Coway AIRMEGA 400s Manual Del Usuario página 18

Ocultar thumbs Ver también para AIRMEGA 400s:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CLEANING METHOD
- Always unplug the power before cleaning.
-  D o not use detergents containing organic solvents 
Tips
- Do not immerse the purifier in water or sprinkle water on it.
Cleaning the outlet and detach-able top outlet grille
Turn the detachable vent grill on top of
the outlet counterclockwise and lift it,
then clean the grill and outlet with a soft
brush or vacuum cleaner.
* Be careful not to let dust enter the
vent while cleaning.
Cleaning the pollution sensor (clean every 2 months)
1. Clean the pollution sensor air inlet and outlet with a soft brush
or vacuum cleaner.
* Take care that dust does not fall inside the purifier while cleaning.
2. Remove the purifier's front cover and open the air pollution sensor cover.
Wet a cotton ball with a small amount of water and wipe the lens, dust intake, and outlet, then
wipe again with a dry cotton ball to dry.
* If cleaning is not done regularly, the
performance of the air quality sensor
may decrease.
* If cleaning is not done regularly, the
performance of the air quality sensor
may decrease.
Cleaning the side cover
Remove the side cover from the purifier and then wipe away dust
stuck to the surface with a soft, dry cloth or soft brush.
* If there is severe contamination, use a damp cloth
(do not use abrasives).
Cleaning the purifier
Wipe with a soft, dry cloth.
* If there is severe contamination, use a damp cloth
(do not use abrasives).
17
(solvents, thinners, etc.), bleach, chlorine, or abrasives to clean.
outlet
Dust outlet
Dust inlet

Publicidad

loading

Este manual también es adecuado para:

Ap-2015e