Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING THE MAINS SUPPLY CABLE
•
If the mains supply cable is damaged, then it must be replaced by an appropriate replacement.
•
The mains supply cable should be replaced in accordance with the following instructions:
➢ Switch the appliance off at the control switch.
➢ Open the terminal block on the underside of the hob.
➢ Unscrew the terminal screws fixing the cable.
➢ The "green-yellow" earth wire must be connected to the terminal marked
about 10 mm longer than the live and neutral wires.
➢ The "blue" neutral wire must be connected to the terminal marked with letter (N) - the live
wire(L1) must be connected to the terminal marked with letter (L1) (220-240V 1N～).
➢ The "blue" neutral wire must be connected to the terminal marked with letter (N) - the live
wire L1 must be connected to the terminal marked with letter (L1), the live wire L2 must be
connected to the terminal marked with letter (L2) (380-420V 2N～).
52
. It must be
Publicidad
