Publicidad
Idiomas disponibles
Idiomas disponibles
6.6 Within 30 seconds of automatic heating mode operation, press the minus key "
certain level, then the running time is counted in the set level time.
For example, when the indicating digital tube " " and " " is alternately displayed and has been
running for 20 seconds. Press the minus key "
have been run will be automatically counted in the 2.5 minutes of the 6th level, while the 6th level
will continue to run for 2.5 minutes minus 20 seconds, that is 2 minutes and 10 seconds. Then turn
back to normal heating mode.
7.TIMER ADJUSTMENT
After selecting the corresponding power of the cooking zone, press the time key"
tube will display "00" and the decimal point on the right will display " ".
At this time, the timing mode is entered, and the timing time of the selected burner can be set; (The
following operations are required in In timing mode)
✓ If you want to cancel the timing, you can adjust the timing time to zero.
✓ The first time you press the plus key"
press the plus or minus key to adjust the timing time.
✓ Press the plus key"
increased by 1 minute. The timing will be continuously changed between 1-99 minutes. The
maximum adjustment to 99 minutes;
✓ Press the minus key "
by 1 minute. When the timing time is less than or equal to 30 minutes, the continuous adjustment
timing will continuously change between 30-0 minutes; If the timing has been adjusted by the
plus key "
" for more than 30 minutes, press the minus key "
continue to change the timing continuously between 30-0 by the minus key.
✓ After the timer countdown is 0, the buzzer will continue to sound for 2 minutes, and you can
press any key to turn off the beep.
NOTE :
1. If the timing of a certain cooking zone has been set, to change the time, press the time key again
to select the corresponding cooking zone, and then enter the new time by plus and minus keys.
2. After the cooking zone is selected, the timing setting cannot be made before the cooking zone
power is set, and the time key is invalid.
3. When the timing of a certain cooking zone is set for the first time, if the cooking zone selection
key corresponding to the cooking zone is pressed when the timing is not confirmed, the timing
of the cooking zone is canceled.
4. When single or multiple cooking zones are working, the decimal point " "of the corresponding
cooking zone is always displayed during the timing setting process.
When multiple cooking zones are working, if two or more cooking zones have been set the time,
the timing digital tube displays the minimum timing of cook zone. The decimal point of
corresponding cooking zone is always on. The digital tube decimal point " " is extinguished until
the countdown time is over.
8.POWER OFF
Under standby mode or heating mode, long press " " key for 3s, a short audible signal will be heard,
the appliance will go into power off mode. If the corresponding cooking zone surface has residual
heat at this time, the digital tube of power level indicator will flash display " ",and indicate residual
heat warning.
", the timing starts from 1 minute, after which you can
" for each time, the buzzer will beep once, and the heating time will be
" for each time, the buzzer will beep once, and the timing will be reduced
" to adjust to 6th level, then the 20 seconds that
58
" to adjust to a
", the timer digital
" to adjust the timing to 0, and
Publicidad
