Descargar Imprimir esta página

Jocel JP4EV002082 Manual De Instrucciones página 56

Placa vitroceramica

Publicidad

Idiomas disponibles

Idiomas disponibles

✓ If more than one zone is operating at the same time, total power will equal to the sum of the
powers of all the working cooking zones, each cooking zone will work according to their power
modulation ratio, and will not affect each other.
NOTE:
1. During the same period, only one hob top key is valid, that is only one decimal point " " can be
displayed.
2. Press minus key "
automatically.
4. MULTIPLE-ZONE HEATING FUNCTION
4.1 Open double zone heating function: The outer zone can only start after the inner zone is open.
1. Press the cooking zone select key which need to heat, corresponding cooking zone digital tube
decimal point " " will display.
2. Press plus or minus key to select the power level you need.
3. Re-touch the cooking zone select key, cooking zone digital tube will display single-zone " ".
Then press the cooking zone select key again to open the outer zone. After the outer zone is
opened, cooking zone digital tube will display double-zona " ".
4.2 Close multiple-zona heating function
1. Touch the cooking zone select key which need to heat, corresponding hob top digital tube
decimal point " " will display.
2. Touch the cooking zone select key to close the outer zona, the inner zona continues to work.
5.POWER LEVEL ADJUSTMENT
✓ Under the standby mode, press cooking zone select key to choose the corresponding cooking
zone, corresponding cooking zone digital tube decimal point " " and heating level will display.
You can press the plus "
✓ By holding down either of these keys, the value on the zone indicator will adjust up or down.
Each pressing "
digital tube. Each pressing "
"+" or "-" key, a short audible signal will be heard). Keep pressing "
continuously increasing or decreasing effect.
✓ Upon completion of power level adjustment, the decimal point " "of digital tube will stop flashing
and normally display the power level within 10 seconds of no operation.
✓ When switching any of the cooking zone power level to 0, it will stop the power output of that
cooking zone.
✓ If a cooking zone has been heated, power level of all the cooking zone are "0", the appliance
will automatically enter into shutdown status after 1 minute no operation.
6.AUTO-HEATING FUNCTION
Your hob can auto-heating following the below steps:
6.1 Turn on automatic heating: Press plus or minus key to set the power to level 9, then touch
plus key "
" to let the power level alternately display " " and " ".At this time, press minus key"
to adjust the auto-heating level you need, such as level 6. In this automatic heating process, the
corresponding power level indicating digital tube is alternately display " " and " ". Alternate display
time is 2.5 minutes.
" to set the power level to "0", then the heating hob top will close
"and minus "
" key, power level will add one, until level 9, and displayed on its corresponding
" key, power level will reduce one, until level 0(Each pressing of
" keys to adjust suitable power level.
56
", "
" keys will make
"

Publicidad

loading