Husqvarna Z560X Manual De Usuario página 15

2. Make a small turn (A) in the direction of the uncut
area of grass.
C
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance schedule
* = The instructions are not given in this operator's
manual.
Maintenance
Lubricate all grease nipples.
Grease nipple on page
Refer to
24 .
Do a check of the parking
To examine
brake. Refer to
and adjust the parking brake on
page 18 .
Do a check of the safety sys-
Safety devices on
tem. Refer to
the product on page 8 .
Make sure that there are no
fuel or oil leaks from the prod-
uct.
Make sure that there are no
damages on the product.
2173 - 001 - 27.06.2023
B
A
Maintenance
Before you do any
Daily mainte-
nance
Before After
use use
X
*
*
3. Pull the 2 control levers to the reverse position
and move the product rearward (B).
4. Push the control levers forward. To make a small
turn (C), pull harder on the control lever that is in
the direction of the row you have cut before.
5. Push the 2 control levers forward to cut the next
row.
X = The instructions are given in this operator's
manual.
O = Refer to the engine manual for instructions.
Maintenance schedule for the operator
Maintenance interval in hours
25 50 100 250
O
X
Each
season
300 400 500
15