Descargar Imprimir esta página

Husqvarna Z560X Manual De Usuario página 26

Ocultar thumbs Ver también para Z560X:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Problem
There is vibration in the prod-
uct.
The engine becomes too hot.
The battery does not charge.
The product moves slowly, with
irregular speed or not at all.
The drive of the blades do not
engage.
The transaxle leaks oil.
The cutting result is unsatisfac-
tory.
26
Cause
The blades are loose. Refer to
One or more of the blades are not balanced. Refer to
page 4 .
The engine is loose.
The air filter or the cooling fins are clogged.
There is overload in the engine.
The airflow around the engine is not sufficient.
The engine speed regulator is damaged.
The oil level is too low.
There is dirt in the fuel line.
The spark plug is damaged.
The connection at the cable connectors on the battery terminals is bad.
To clean the battery on page 18 .
Refer to
The charging lead is disconnected.
The charging system does not operate correctly.
The parking brake is engaged.
The hydraulic release lever is engaged.
The drive belt on the transmission is loose or damaged.
There is air in the hydraulic system.
The drive belt on the mower deck is loose.
The electromagnetic coupling contact is loose.
A fuse is blown. Refer to
The seals, housing or gaskets are damaged.
There is air in the hydraulic system.
The tire pressure is different on the right and left sides. Refer to
pressure on page 20 .
The blades are damaged.
The suspension of the cutting deck is not level.
The blades are blunt. Refer to
The product is operated at too high forward or rearward speed. Refer to
get a good cutting result on page 14 .
The grass is long or wet. Refer to
There is grass blockage in the cutting deck. Refer to
on page 17 .
To examine the blades on page 21 .
Fuses on page 5 .
To examine the blades on page 21 .
To get a good cutting result on page 14 .
Throttle control on
Tire
To
To clean the product
2173 - 001 - 27.06.2023

Publicidad

loading