Maintenance
Make sure that there are no
loose parts.
Do a check for damages on the
cutting deck.
Do a check of the tire pressure.
Tire pressure on page
Refer to
20 .
Start the engine and blades
and listen for unusual sounds.
Clean the inner surface of the
cutting deck. Refer to
the product on page 17 .
Clean around the engine.
Clean around the belts and the
belt pulleys.
Do a check of the battery con-
nectons.
Do a check of the muffler and
the spark arrestor screen.
Sharpen or replace the blades.
To replace the blades
Refer to
on page 21 .
Replace the fuel filter.
Do a check of the throttle cable.
Do a check of the front wheels.
Do a check of the belts and the
belt pulleys.
Disassemble and examine the
starter.
Do a check of the cutting deck
for adjustment. Refer to
just the parallelism of the cut-
ting deck on page 20 .
Do a check of the engine oil
To do a check
level. Refer to
of the engine oil level on page
22 .
Clean the air intake of the en-
1
gine.
Do a check of the cleanout cov-
er on the engine.
1
In conditions with dust, cleaning and replacement must be done more frequently.
16
Daily mainte-
nance
Before
use
*
*
X
*
To clean
To ad-
O
Maintenance interval in hours
After
25
50
100
use
X
X
*
*
*
*
*
*
X
O
O
250
300
400
500
*
*
*
*
X
2173 - 001 - 27.06.2023
Each
season
*
*
X
*
X
*
X