Final Decomissioning From Operation - Kemper Clean Air Tower Instrucciones De Uso

KEMPER CleanAirTower Instruction manual - EN

8.3 Final decomissioning from operation

Disassembly works must be carried out with utmost care to avoid stirring up dust
adhering onto the filtration device and injury to the authorized personnel. The
workplace should be separated/identified and stirred up dust must be exhausted with
an industrial dust vacuum cleaner of the H class immediately!
Before start of disassembly, remove all dust present in the filtration unit of the
filtration device. An industrial dust vacuum cleaner of the H class should be used for
this purpose when necessary and it is necessary to use personal protective
equipment such as protective clothing, gloves, breathing apparatus with ventilator,
etc.
The working area should be cleaned after disassembly of the filtration device.
Make an agreement with a regional institution on ecological disposal of the parts
contaminated with dust, etc. before disassembly with consequent disposal.
Serial No.: 1502206 - 80 - Rev.: 1
Status as of: 05/2014
Technical modifications without previous notification and errors reserved.